In our daily life, cleaning plastic lock shell mould is often forgotten by many people, and it often takes ten days and a half to remember to clean it up, and at this time it has been "disgraced". "Too much dust in sockets such as plastic lock shell mould can easily lead to poor contact, and in severe cases, it will lead to local heating. If the temperature rises to a certain level, sockets such as plastic lock shell mould will be deformed, and a few will cause short circuits and cause fires. "Lu Jianguo, director of the comprehensive inspection department of the National Household Appliances Quality Supervision and Inspection Center of the China Household Appliances Research Institute, reminded.
Power sockets such as plastic lock shell mould should be cleaned every three or four days. But people who love to clean like to wipe the socket with a wet rag. Lu Jianguo emphasized that this is a taboo, because the moisture on the rag will make the socket wet, and plug it in immediately after wiping, which will easily cause a short circuit. It is best to vacuum the dust out of the socket, or turn the socket upside down, pat the bottom lightly, and then wipe the surface with a dry cloth. "Be sure to tap lightly." Lu Jianguo said, re-patting or simply knocking the socket on the ground will damage the parts inside.
In fact, many sockets now have some dust-proof measures inside. Therefore, if the socket is in a dry and clean environment, it only needs to be cleaned regularly. It is best to use a socket with a waterproof cover in the bathroom, because water vapor may make dust, hair, etc. become conductors, forming an electrified state. Some people call this "conducting dirt." In addition, the power plug that has not been unplugged for a long time should also be cleaned frequently, otherwise it is easy to produce "contamination and conduction".
plastic lock shell mould https://www.tangrammould.com/News
Comments (0)