The LED explosion-proof light, which is one kind of explosion-proof light, is a lighting device for special industries. Its working principle is basically the same as the explosion-proof lamp. The difference is that its light source adopts the LED light source. It is widely used in places which have high-protection requirements and are moist, such as ships, chemical, oil, mining, pharmaceutical and painting.
The LED explosion-proof lighting refers to the lighting fixtures which are the various specific measures taken to prevent ignition of the surrounding explosive mixtures. The LED explosion-proof light is currently the most energy-saving explosion-proof light, which can be used safely in a variety of flammable and explosive places, suitable for oil mining, military, offshore oil platform, cruise, etc.
The LED explosion-proof lamp includes a lampshade, a lamp cover at the front end of the lampshade, a light emitter and batteries inside the lampshade, a switch on the surface of the lampshade.
The illuminator is a high-power LED module, and there is a wide voltage input drive circuit between the illuminator and the battery, which includes a constant current chip. The constant current chip and the battery are composed of a power module. The power module is sealed with the LED module. The lamp cover and the lampshade are ultrasonic welded.
It uses a low heating value of LED to achieve an intrinsically safe level explosion-proof, and the LED source has a long service life. The heat dissipation device is installed on the lampshade, which can realize effective heat dissipation of the LED module, guaranteeing the use of high stability.
Performance And Advantages Of LED Explosion-proof Light
1. LED explosion-proof light can save 50% -70% energy compared to traditional light sources, that is, the same lighting effect can be obtained with smaller power LED luminaires replacing larger power traditional lighting.
2.The lampshade is made of aluminum alloy and has a surface treatment with high-pressure static spray.
3.The lamp cover is made of tempered glass with stainless steel exposed fasteners. The protective cover is galvanized with a sprayed surface, double anti-corrosion.
4.The lamp adopts the flameproof structure design and the material is high-strength die-cast aluminum. The surface is sprayed and the transparent cover adopts high-strength tempered glass, corrosion resistance, beautiful, and strong.
5.It has an integrated design, easy to install and repair, the ballast cavity independently design, effectively avoid the heat transfer of the light source cavity to the ballast.
6.It has a flexible light distribution, can be made into various LED floodlights.
7.It adopts LED as a light source with high light efficiency, long service life and the average service life is more than 50,000 hours, with long-term maintenance-free.
8. No Wireless fuse, nor electrode aging and other disadvantages
9. Power supply with DC low voltage, the heating value is much lower than the traditional electrical light source and does not generate high-frequency electromagnetic fields, no electromagnetic interference to surrounding equipment.
10.LED adopts epoxy resin solid package, impact resistance, anti-vibration, not easy to break.
11. The emission spectrum of LED is completely visible, no ultraviolet radiation, no mercury and does not produce heavy metal pollution.
Comments (0)