Advantages of gas piping automatic butt welding machine The transformer is the same as the low-power copper rod advancements of gas piping automatic butt welding machine, which uses a stepless regulating transformer, which is generally controlled by the controller for grading, mainly divided into 99 levels of voltage regulation, so as to control the current Output.
The common power of this series of transformers are: 16KW 25KW
Its features and advantages are:
1. Using high-quality high-permeability silicon steel sheets, the silicon steel sheets are cut and crossed to form the shell, so that most of the magnetic flux is confined to the iron core, and the coil can obtain a relatively high degree of magnetic coupling.
2. Two sets of all-copper wire covered with different turns are used as coils, and they are combined with each other inductance. When an AC current is applied to one set of coils, an AC voltage with the same frequency will be induced in the other set of coils. , so as to better reduce the pressure.
3. Use angle iron bracket to fix, stable and corrosion-resistant
4. The exterior is coated with insulating paint and baked solid, and the service life is longer, up to more than 20 years.
5. The current is large and the voltage is small. The maximum no-load voltage of the 25KW advancements of gas piping automatic butt welding machine is only 3.65V, which is safer.
advantages of gas piping automatic butt welding machine https://www.dowelding.com/Welding-process-and-principle-of-butt-welding-machine.html
Comments (0)