The outer dimension of the dust extractor cartridge filter should not be too high, if the outer dimension is too high, it will affect the use, and the height can be moderate.
On the premise that the size of the dust extractor cartridge filter has been determined, changing the process parameters such as wave height and wave number to increase the effective filtering area of the filter material as much as possible can reduce the flux on the surface of the unit filter material and increase the dirt holding capacity of the entire filter element. Filter life. By increasing the filter area of the dust extractor cartridge filter, the service life of the filter element tends to increase faster. If the wave number increases too much, the crowded folded wave will reduce the hydraulic oil flow space between the waves and increase the pressure difference of the filter element. .The time to reach the filter element differential pressure alarm will be short and the service life will be reduced.
When the dust extractor cartridge filter is under a large force, a strong support should be added to the filter layer. When the corrugation is too high and the pressure is applied, the filter area will become smaller, and the flow rate will be too large and the filter function will be lost. Therefore, special attention should be paid to the pressure effect.
The dust extractor cartridge filter is an important filter element in the mechanical system, which can protect the normal operation of the mechanical system.
dust extractor cartridge filter https://www.kaisenfilter.com/Filter-Cartridges
Comments (0)